The Industrial Ethernet Switch is equipped with 5-port Ethernet transceivers. Each of the transceivers complies with IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. By using standard auto-negotiation, inclusive of auto-MDIX, Industrial Ethernet Switch is capable to support MAC addresses up to 2K. The Multi-Field classification is powerful classifier (layer 2 to layer 4 packet headers) in packet classification.
The Ethernet transceiver ports auto-negotiate for 10/100Mbps speed and auto-detect Full or Half-duplex mode. The power input of Industrial Ethernet Switch conforms to industrial standard.

特色

Wide operating temperature range : -20 °C to 70 °C
Auto MDI-MDIX
Up to 2K MAC addresses
Support auto-polarity for 10Mbps
Broadcast storm protection
Layer 2-4 Multi-Field classifier
Support traffic policy
5 to 30VDC Power Input
Industrial metal case
Support screw terminal or DC-JACK
Low power consumption

規格

Standards : IEEE802.1Q / IEEE802.3 / IEEE802.3u / IEEE802.3x
Max forwarded packet length 1792 bytes (MAX.)
Address Table Size:2K MAC addresses
4-way Hashing Algorithm
Individual/Multicast MAC
Processing Type:Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Input Voltage : 5 to 30VDC
Power Input Connector : DC-JACK or Screw Terminal
Reverse Polarity Protection
Overload Current Protection
Power Consumption:  2W Max. 0.35A @ 5VDC
Power consumption measured at 12V.

* For the port connected, the power consumption is the same no matter data is in transmission or not.

Casing : Iron case
Dimensions : 70 x 90 x 28 mm (W x D x H)
Weight : 200g (0.44lb.)
Installation : Screw terminal OR DC-JACK
Operating Temperature : -20 °C to 70 °C
Storage Temperature : -40 °C to 85 °C
Ambient Relative Humidity : 5% to 95% (non-condensing)