首頁 > 產品 > USB > USB 轉串列 > USB 轉 RS232 轉換器

USB 轉 RS232 轉換器

US232

FTDI chip

概述規格訂購資訊詢價資源

這款 USB 轉 RS232 串列埠轉換器是沒有 COM 或 DB9 串列埠的筆記型電腦和桌上型電腦的理想配件。它支援 Windows、Mac、Linux 和 Android，可實現快速效能，是工業自動化系統、科學儀器、銷售點系統以及其他專業工業和消費應用的便捷連接解決方案。

Tx 和 Rx LED 指示燈

TX 和 RX LED 指示燈

整個 USB 協定均在晶片上處理

​免版稅驅動程式​在大多數情況下無需開發 USB 驅動程式

UART 介面支援 7 或 8 個資料位元、1 或 2 個停止位元以及奇/偶/標記/空格/無奇偶校驗​ ( odd / even / mark / space / no parity​ ​)

完全輔助硬體或 X-On / X-Off 軟體握手

RS232 電壓位準下的資料傳輸速率為 300 ​bps 至 250 ​kbps

512 位元組接收緩衝區和 512 位元組發送緩衝區利用緩衝區平滑技術實現高資料吞吐量

可調接收緩衝區逾時

RS232 I/O 的 ESD 保護超過 ±15kV IEC 1000-4-2 氣隙放電、±15kV 人體模式 (HBM) 和 ±8kV IEC 1000-4-2 接觸放電

USB 線上的 ESD 可保護超過人體模式 (HBM) 的 ±2kV、機器模式 (MM) 的 ±200V 和充電設備模式 (CDM) 的 ±500V

低工作電流和 USB 掛起電流

USB 頻寬消耗低

USB 2.0 全速相容

-40°C 至 85°C 擴展工作溫度範圍

支援的作業系統 Windows 7 / 8 / 8.1 / 10 32,64-bit
Windows Vista
Windows XP 32,64-bit
Windows XP Embedded
Windows CE.NET 4.2 , 5.0 and 6.0
MAC OS OS-X
Linux 2.6.32 or later
Android
連接器 USB : USB Type A
RS232 : DB9 Male
線長 10 cm (3.94″)
電源模式 Bus Powered
工作電壓 5VDC
電量消耗 5V x 90mA at Max.
淨重 30 g
尺寸
認證 CE, FCC
RS232 腳位排列

 

US232 US232P 線長如下

線長 備註
10 cm (4″) 標準
30 cm (11.8″) 選項
100 cm (3.28 feet) 選項
180 cm (6 feet) 選項

    請填寫並提交以下表格，我們將盡快回覆您。



    Linux VCP drivers are integrated into the kernel.

    Mac OS X10.15 and macOS 11 x64 Driver FTDIUSBSerialDextInstaller 1.4.7
    This is a Beta driver release and the installer should be run from the /Applications folder on your machine

    Click here for most updated drivers

    Click here and look for VCP drivers for most updated drivers if page is not found from above link.

    文件 描述 File size
    pdf Windows XP Installation Guide FTDI driver installation guide for Windows XP
    		 1 MB
    pdf Windows Vista Installation Guide FTDI driver installation guide for Windows Vista
    		 745 KB
    zip Windows Driver x86/x64 CDM v2.12.36.4 WHQL Certified (Manual) FTDI VCP driver. Support Windows 7, Server 2008 R2 and Windows 8, 8.1, Server 2012 R2, Server 2016 and Windows 10. Also, as Windows 8 RT is a closed system not allowing for 3rd party driver installation our Windows 8 driver will not support this variant of the OS. You must use the Windows RT build for this platform.
    		 1 MB
    zip Windows Driver x86/x64 CDM 2.12.36.4 Setup (Executable) FTDI VCP driver. Support Windows 7, Server 2008 R2 and Windows 8, 8.1, Server 2012 R2, Server 2016 and Windows 10. Also, as Windows 8 RT is a closed system not allowing for 3rd party driver installation our Windows 8 driver will not support this variant of the OS. You must use the Windows RT build for this platform.
    		 2 MB
    zip Windows Driver CDM 2.08.24 Setup (Executable) FTDI VCP driver. Support Windows XP, Vista, Server 2003, Server 2008
    		 1 MB
    pdf Windows CE Driver Catalog Item Usage (AN-319) For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    		 516 KB
    zip Windows CE 7.0 x86 Driver CAT For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    		 33 KB
    zip Windows CE 7.0 ARM Driver CAT For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    		 52 KB
    zip Windows CE 6.0/7.0 x86 VCP Driver 6.0 Windows CE 6.0/7.0 x86 VCP Driver 6.0
    		 37 KB
    zip Windows CE 6.0/7.0 ARM v4 VCP Driver Windows CE 6.0/7.0 ARM v4 VCP Driver 6.0
    		 42 KB
    zip Windows CE 6.0 x86 Driver CAT For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    		 38 KB
    zip Windows CE 6.0 ARM Driver CAT For use of the CAT files supplied for ARM and x86 builds refer to AN-319
    		 42 KB
    zip Windows CE 4.2-5.2 x86 VCP Driver FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    		 35 KB
    zip Windows CE 4.2-5.2 SH4 VCP Driver 1.1.0.10 FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    		 40 KB
    zip Windows CE 4.2-5.2 MIPS IV VCP Driver 1.1.0.10 FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    		 45 KB
    zip Windows CE 4.2-5.2 MIPS II VCP Driver 1.1.0.10 FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    		 43 KB
    zip Windows CE 4.2-5.2 ARM v4 VCP Driver 1.1.0.20 FTDI driver. Supports versions of Windows CE 4.2-5.2 based operating systems: Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5, Windows Mobile 6, Windows Mobile 6.1 ,Windows Mobile 6.5
    		 40 KB
    zip Windows CE 2013 x86 VCP Driver Windows CE 2013 x86 VCP Driver
    		 77 KB
    zip Windows CE 2013 ARM VCP Driver Windows CE 2013 ARM VCP Driver
    		 196 KB
    pdf Windows 98 Installation Guide FTDI driver installation guide for Windows 98 & Windows ME
    		 617 KB
    pdf Windows 8 Installation Guide FTDI driver installation guide for Windows 8
    		 1 MB
    pdf Windows 7 Installation Guide FTDI driver installation guide for Windows 7
    		 661 KB
    pdf Windows 2000 Installation Guide FTDI driver installation guide for Windows 2000
    		 388 KB
    pdf Windows 10 Installation Guide FTDI driver installation guide for Windows 10
    		 1 MB
    zip Mac VCP Driver OS X 10.9 to 10.14 version 2.4.4 VCP driver 2.4.4 for x64 of Mac OS X 10.9 to 10.14. This driver is signed by Apple
    		 62 KB
    zip Mac OS X10.15 and macOS 11 x64 Driver FTDIUSBSerialDextInstaller 1.4.7 This is a Beta driver release and the installer should be run from the /Applications folder on your machine
    		 125 KB
    pdf Mac OS X Installation Guide FTDI driver installation guide for Mac OS X
    		 1 MB
    zip Mac Driver OS X 10.3 to 10.8 version 2.2.18 FTDI driver. Support OS X 10.3 to 10.8
    		 412 KB
    pdf Mac customized VCP VID/PID (TN-105) Refer to TN-105 if you need a custom VCP VID/PID in MAC OS X 10.3 to 10.8
    		 530 KB
    gz Linux Driver x64 ftdi_sio.tar 1.5.0 All FTDI devices now supported in Ubuntu 11.10, kernel 3.0.0-19.
    		 130 KB
    pdf Linux Driver Installation Guide Drivers Installation Guide for Linux
    		 427 KB
    pdf Linux Customizing VID PID (TN-101) Refer to TN-101 if you need a custom VCP VID/PID in Linux
    		 154 KB
    zip Windows CE 6.0/7.0 SH4 VCP Driver Windows CE 6.0/7.0 SH4 VCP Driver 6.0
    		 42 KB
    zip Windows CE 6.0/7.0 MIPS IV VCP Driver Windows CE 6.0/7.0 MIPS IV VCP Driver 6.0
    		 47 KB
    zip Windows CE 6.0/7.0 MIPS II VCP Driver Windows CE 6.0/7.0 MIPS II VCP Driver 6.0
    		 45 KB
    pdf Windows CE Installation Guide Driver installation under Windows CE
    		 574 KB
    文件 描述 File size
    zip TeraTerm version 4.58 TeraTerm version 4.58 tool for testing serial ports and TCP/IP
    		 5 MB