RS232 к Bluetooth 2.1

BT232

Пока есть в наличии

Bluetooth 2.1 + EDR
Support SPP mode (Serial Port Profile)

Overview & ApplicationConfigurationТехнические характеристикиModel ComparisonPасследованиеРесурсы

Selective as Slave or Master mode
Bluetooth v2.1 + EDR
SPP profile
Bluetooth Class 1
Configuration utility with ease of use

 

Parameters Configuration – Demo video

 

Pairing & Loop Test with PC – Demo video

 

Pair the BT232 with a mobile phone or computer

 

Configuration Utility

How to configure and pair 2 units of BT232/BT432

Connect BT232/BT432 to PC with RS232 parallel (pin to pin) cable

Launch BT1 configuration utility from PC

Select the COM port where BT232/BT432 connects to, then click “Connect”, then icon becomes “Disconnect” when connected.

Click “Read” at the bottom to load current parameter settings of the BT232/BT432.

Edit parameter settings as needed, then click “Write” at the bottom to save settings to the BT232/BT432.

To pair 2 units of BT232/BT432 automatically, both units’ setting must be the same in pin code, baud rate, stop bit, and parity. One set as Master and the other set as Slave. Peer Address must be all “0”. Then power on both BT232/BT432 units and the “Pair’ LED on each unit will become always on means both units already paired automatically.

Windows utility for setup
Use RS232 Parallel (pin to pin) cable to connect to PC for setup
Selective as Slave or Master mode
Bluetooth v2.1 EDR compliant
Support SPP profile
Bluetooth Class 1
Connector: RS232 DB9 Female * 1
Range: 300 feet (1200~115200 bps)
Auto Pairing without software setup [when using a pair (2 units) of this device that one set as Master and the other set as Slave] 3.0 dBi exchangeable antenna
Enable two RS232 devices to communicate over Bluetooth
Power consumption: DC5V 150mA
Power supply for BT232 may not be needed if the RS232 device pin 9 can provide DC+5V 150mA

When pairing two units of this Bluetooth RS232 converter with each other, one should be set as Master and the other should be set as Slave.

ModelBT232BT432BT452BT2232BT2485BT5232BT5485
ОписаниеRS232 to Bluetooth 2.0Последовательный порт Bluetooth 2.1Последовательный порт Bluetooth 5.0RS232 к Bluetooth 2.1RS485 to Bluetooth 2.1RS232 to Bluetooth 5.2RS485 to Bluetooth 5.2
Bluetooth ChipsetCSRCSRNordic 52840
Carrier Frequency2400~2483.5 MHz2400~2483.5 MHz2400~2483.5 MHz2400~2483.5 MHz2400~2483.5 MHz2400~2483.5 MHz2400~2483.5 MHz
ClassClass 1Class 1Class 1Class 1Class 1Class 1Class 1
Tx RF Output Power13 dBm13 dBm8 dBm18 dBm18 dBm6 dBm6 dBm
Rx Sensitivity-86 dBm (min)-86 dBm (min)-93 dBm (min)-86 dBm-86 dBm106.7 dBm106.7 dBm
AntennaSMA plug 2 dBiSMA plug 2 dBiSMA plug 2 dBiSMA plug 2 dBiSMA plug 2 dBiSMA plug 2 dBiSMA plug 2 dBi
Расстояние100 meters100 meters100 meters100 meters100 meters100 meters100 meters
RS232111
RS422/48511
RS232/485/42211
Baud Rate1.2 ~ 115.2 Kbps1.2 ~ 115.2 Kbps4.8 ~ 115.2 Kbps2.4 ~ 230.4 Kbps1.2 ~ 921.6 Kbps2.4 ~ 230.4 Kbps1.2 ~ 921.6 Kbps
SPP (Serial Port Protocol)VVVV
AT commandVV
UUIDVVV
Setup UtilityVVVVVVV
Power InputDC 5~7 VDC 9~24 VDC 9~30 VDC 5~28 VDC 5~28 VDC 5~28 VDC 5~28 V
DIN-Rail MountingVV
Рабочая Температура-10° C ~ 70° C-10 °C ~ 70 °C-10 °C ~ 70 °C-30 °C ~ 75 °C-30 °C ~ 75 °C-20 °C ~ 75 °C-30 °C ~ 75 °C
Вес нетто35 g95 g100 g105 g111 g114 g120 g

    Пожалуйста, заполните и отправьте следующую форму, мы ответим вам как можно скорее.



    Файл Описание Размер файла
    pdf BT232 Quick Guide BT232 Bluetooth to RS232 Quick Guide
    302 КБ
    zip BT1 v3.0 Configuration Utility Configuration setup utility
    386 КБ
    ppt BT232 Bluetooth to Serial Application Application description
    385 КБ