Scada sends Modbus TCP commands over Ethernet to get Modbus RTU data

Send Modbus TCP commands over WiFi / Ethernet to get Modbus RTU data

Simple and Straight configuration via web interface

Status Summary

Configure Network

Configure System

Configure Modbus Gateway TCP to RTU/ASCII Slave

RTU/ASCII to TCP Slave

CPU : 32-bits ARM7 Winbonds CPU , 80 MHz
RAM : 8 M Bytes SDRAM
ROM : 4 M Bytes Flash ROM
OS : uClinux OS
Ethernet : RJ-45 Connector, 10/100 Mbps (Auto Detect)

Программное обеспечение
TCP to RTU Slave
TCP to ASCII Slave
RTU to TCP Slave
ASCII to TCP Slave

TCP to RTU/ASCII Slave
Operates as a TCP Server
Can be connected by 8 TCP user connection and polling simultaneously
32 simultaneous Request for each TCP Master.

RTU/ASCII to TCP Slave
Operates as a TCP Client
Can connect to 8 TCP servers and polling simultaneously (mapped via user defined Slave ID range)
Can connect up to 256 serial chained RTU/ASCII Slave using 8 units of this Modbus gateway

Note
0 and 245~255 are not recommended to be used as Slave ID if not sure if these numbers are already used or not as ID in the environment. This is because usually 0 is used for broadcast and 245~255 are used for else purpose.

Utility : Built-in Web server Setup, Easy Operation
Mode : TCP Server / TCP Client / UDP
Setup : HTTP Browser Setup (IE & Netscape) , Console
Security : Setup Password
Protection : Built-in 1.5KV Magnetic Isolation

Serial Port
1 x RS232 or 1 x RS422/RS485 ( software select)
Speed : 300 bps ~ 230.4 Kbps
Parity : None, Odd, Even, Mark, Space
Data Bit : 5, 6, 7, 8
Stop Bit : 1, 2
RS232 Pins : Rx, Tx, GND, RTS, CTS, DTR, DSR, DCD
RS422 Pins : Rx+, Rx-, Tx+, Tx- (Surge Protect)
RS485 Pins : Data+, Data- (Surge Protect)
Built-in RS422/RS485 Terminal Resistor
15KV ESD for all signals

Watch Dog Функция
Power : DC 9-24V
Led Lamp : SYS (PWR), LAN, LED 1, LED 2 ( User Define )
Operating Temperature : 0ºC ~ 70ºC
Storage Temperature : -10ºC ~ 80ºC
Dimension : 100 x 90 x 25 mm ( W x D x H )
Weight : 140 g
Support DIN-Rail or Wall mount
RoHS : Compliant with RoHS
Regulatory Approvals : EMC: FCC Class A, CE Class A
Warranty : 1 year

LED Indicators Definition
SYS
Flashing : System is normal (Flashing speed is about once per second)
LAN
Off : LAN cable is not connected
On : LAN cable is connected
Flashing : Data in transmission
TCP
On : No data in transmission
Flashing : Data in transmission
RTU
Off : No data in transmission
Flashing : Data in transmission

Сравнение моделей Modbus MQTT