PMQ830SPB
Support MQTT Sparkplug B
1 x RS232/422/485
1 x RS232/485
データ・ロガー
Ethernet
4G
概要設定仕様写真モデルの比較注文情報問い合わせリソース
Supports MQTT Sparkplug B V1.0 protocol
Supports MQTT Version 3.1.1 protocol
Supports Modbus/TCP/RTU/ASCII protocols
Web page easy setup
Support MQTT SPARKPLUG B to activate various devices or spread information by coding in JavaScript
Ethernet + WiFi + 4G + Serial + DIO
Send remote Modbus RTU data wirelessly to MQTT server over 4G or 5G or NB-IoT
Web-based setup screen demonstration
MQTT Subscriber
For control devices connected to Serial port 1~2 and TCP socket 1~4
| System | CPU : MT7688AN MIPS CPU, 580 MHz RAM : 128M Bytes DDR2 RAM ROM : 32M Bytes Flash ROM OS : OpenWRT Linux OS |
| Ethernet | Port Type : RJ-45 Connector Speed : 10 /100 Mbps ( Auto Detecting ) Protocol : ARP, IP, ICMP, UDP, TCP, HTTP, DHCP, Protocol : DNS, NTP Mode : TCP Server / TCP Client / UDP Setup : HTTP Browser Setup ( IE , Netscape), Console Security : Setup Password Protection : Built-in 1.5KV Magnetic Isolation |
| Wi-Fi | 2.4G Wi-Fi IEEE 802.11 b / g / n Support AP / Station |
| 4G LTE | mini-PCIe : USB 2.0 for 4G Nano SIM x 1 |
| Other interfaces | USB 2.0 (on PCB) I2C Interface x 1 (For RTC) SD Card slot : micro SD card (For storage) RTC : Real Time Clock x 1 (Battery Backup) Buzzer x 1 Reset Button x 1 4G LTE Reset GPIO x 1 |
| Serial Ports | Port 1 : RS232/422/485 x 1 Port 2 : RS422/485 x 1 Speed : 300 bps ~ 921.6 K bps Parity : None , Odd , Even , Mark , Space Data Bit : 5 , 6 , 7 , 8 Stop Bit : 1 , 2 RS-232 Pins : Rx , Tx , GND RS-422 : Rx+ , Rx- , Tx+ , Tx- ( Surge Protect ) RS-485 : Data+ , Data- ( Surge Protect ) 15KV ESD for all signals Console port : UART – RX+TX+GND |
| Digital Input | Digital Input x 2 Pins (Active High / Active Low Selectable) Dry contact Logic level 0 : close to GND Logic level 1 : openWet contact Logic level 0 : 0 ~ 3 V Logic level 1 : 5 ~ 12 V |
| Digital Output | Digital Output x 2 Pins (Active High / Active Low Selectable)
120VAC @2A |
| 動作温度 | -20 °C ~ 70 °C |
| 保管温度 | -25 °C ~ 80 °C |
| Dimensions | 180 x 120 x 35 mm ( W x D x H ) |
| 重さ | 950 ± 5 g |
| Enclosure | |
| Power | DC 9~32V, 1000mA@12V
500mA@12V Support DC Jack & Terminal Input |
| PoE | Power over Ethernet (optional ) |
| LEDインジケータ | SYS, Wi-Fi, 4G LAN-ACK, Link Serial 0 RX+TX Serial 1 RX+TX DO x 2 + DI x 2 |
| Watch Dog Function | |
| 保証 | 1年 |
| アイテム | 説明 |
| DIN1E3S | DIN Rail Mounting Kit ( 1 ear + 3 screws) |