BT452
在庫限り
Bluetooth 5.0
1 x RS232/RS485/RS422
Support Modbus with Register Length as 4 or less
Support Modbus
Recommend to operate with the number of data not more than 4 from the start address
About 1-2 pieces of data will get dropped from every 200 pieces of data in general operation environment with the number of data not more than 4 from the start address. More data could get dropped if the number of data from the start address is more than 4 or even more.
Simple and Straight Configuration Utility
CPU : ARM Cortex M4 32 bit FPU , 64M Hz
Memory : 1MB Flash ROM , 256KB RAM
Bluetooth Module : Nordic NRF 52840
Serial Port
Number of Ports : RS232/RS422/RS485 * 1 Port ( auto detect )
RS-232 : Rx , Tx , GND , RTS , CTS
RS-422 : Tx+ , Tx-, Rx+ , Rx- ( Surge Protect )
RS-485 : Data+ , Data- ( Surge Protect)
Built-in RS-422/RS-485 Terminal Resistor
Speed : 4800 bps〜115.2K bps
Parity : None , Even
Data Bit : 8
Stop Bit : 1
Bluetooth 5.0
Compliant with Bluetooth v5.0
Operate in 2.4GHz – 2.483GHz ISM Band
-95dBm sensitivity in 1Mbps Bluetooth low energy Mode
+8 dBm TX power(down to -20 dBm in 4 dB steps)
Support Bluetooth Data Rate 1Mbit/sec.
Operating Distance up to 100 meters
Security : 128-bit AES
Setup : Setup Utility on PC / AT command
Use RS232 Crosslink cable to connect to PC for setup
Power : DC 9 ~ 24V / 50ma @ 12V
Led Lamp : SYS (red) , Pairing (green) , Rx(red) , Tx(green)
Operating Temperature : -10℃~70℃
Storage Temperature : -25℃~80℃
Dimension : 85 x 75 x 25 mm ( W x D x H )
Weight : 150 g ( not include power )
| ファイル | 説明 | File size |
|---|---|---|
BT452 Quick Guide
|
|
383 KB |
Configuration Utility v1.3
|
|
387 KB |