Built-in Raspberry Pi CM4 (optional)
Wide Range Input Power DC9~32V
Multiple I/O Interfaces
Powerful Computing capability
CPU Heatsink Transfer Heat To Metal Casing
Ethernet, WiFi, Bluetooth, Serial Port, GPIO, HDMI, I2C, SD, USB, RTC, Buzzer, M.2 (for 5G), Mini-PCIe (for 4G/NB-IoT/LoRa)

RTC Real Time Clock x 1 (Battery backup)
Buzzer x 1
Funzione Watchdog
I2C interface x 1 port (built-in)
SPI interface (onboard)
Display port interface (DSI on raspberry pi onboard)
Camera port interface (CSI on raspberry pi onboard)

Pi CM4 Module (optional)
CPU : ARM v8 A72 Quad core 64-bit SoC 1.5 GHz
ROM : 8 / 16 / 32 G Bytes
RAM : 1 / 2 / 4 / 8 G Bytes LPDDR4 SDRAM
GPU : OpenGL ES 3.0 graphics
OS : Linux OS

Ethernet (RJ45 connector) : Gigabit LAN x 1 , 10/100 Mbps LAN x 1
WiFi 2.4 GHz and 5.0 GHz IEEE 802.11ac (IPEX cable & antenna optional)
Bluetooth 5.0 BLE (optional)
M.2 : USB 3.0 / PCIe for 5G, SSD (optional)
The M.2 slot can be either B key or M key
B key is for 5G
M key is for PCIe SSD or AI Coral Module
mini-PCIe : Only support PCIe based on USB for 4G/NB-IoT/ LoRa (optional)
SIM slot for 4G / 5G

Micro HDMI x 1 for Video / Audio (up to 4KP 60)
H.265 (4KP 60 decode)
H.264 (1080P 60 decode, 1080P 30 decode)

Serial Port
RS232/485/422 x 1
RS232/485 x 1

USB 3.0 x 2
USB 2.0 x 2

Digital Input / Output GPIO x 2 pins
Digital Input x 1 pin (Active High / Active Low Selective)
Dry contact
Logic level 0 : close to GND
Logic level 1 : open
Wet contact
Logic level 0 : 0~3 V
Logic level 1 : 10~30 V
Digital Output x 1 pin (Active High / Active Low Selective)
120VAC @ 0.5A , 240VAC @ 0.25A , 30VDC @ 1A

LED indicator : SYS (PWR) , 5G , 4G , DO , DI , Serial

Operating Temperature : -10 ~ 75 ºC
Storage Temperature : -15 ~ 80 ºC
Dimension : 170 x 110 x 30 mm (W x D x H)
Weight : 950 ± 5 g
Casing : Metal
Power : DC 9~32V, 1000mA@12V Support DC Jack and Terminal input

Specifications are subject to change without prior notice

1. Computer Module Interface : for CM4 (optional EMMC 8/16/32 G RAM 1/2/4/8 G)
2. Input Power : DC Jack 9~32 V (24 Watt)
3. Input Power : Terminal Block 9~32 V (24 Watt)
4. DC Output for external I/O Device same with Input Power voltage
5. DC 5V 500mA output for External I/O Device
6. WiFi / Bluetooth Enable/Disable Jumper
7. EEPROM Write Protect Enable/Disable Jumper
8. CM4 GPIO 3.3V/1.8V Select Jumper
9. RTC / Global Reset Select Jumper
10. Pi Boot Select Jumper
11. CM4 Image Download/Upload Select Jumper
12. LED for Pi Power , EMMC , System (Custom define GPIO-22)
13. USB 1 : USB 2.0 for CM4 Image Download / Upload
14. LAN 2 : 10/100 Mbps
15. LAN 1 : Giga LAN
16. USB 3/4 : USB 3.0
17. USB 5 : USB 3.0 for expansion for AI , USB dongle
18. Serial 1 : RS485/RS422
19. LED : Serial transmission working indication LED
20. Serial 0 : RS485
21. LED : DO / DI working indication LED
22. DO : Active High/Low Select Jumper
23. Digital Output : DO 1
24. DO : NC / NO Select Jumper
25. Digital Input : DI 1
26. DI 2~5 : optional
27. LED : 4G / 5G working indication LED
28. DI : Dry/Wet Contact Select Jumper
29. DI : Active High/Low Select Jumper
30. Serial 1 : RS232
31. Serial 1 : RTS / CTS
32. Serial 0 : RS232
33. DI 1~5 GPIO
34. SPI
35. DO 1~4 GPIO
36. RTC + Backup Battery
37. Buzzer ( GPIO 26 )
38. Nano SIM slot for 5G / 4G / NB-IoT
39. M.2 slot : B Key for 5G ( 3042 / 3052 ) or M Key for PCIe SSD , AI ( 2242 / 2260 / 2280 )
40. mini PCIe for 4G / NB-IoT ( back side )
41. HDMI
42. Soft-Reset ( GPIO 25 )
43. CSI – LAN 2
44. DC 3.3V 200mA output for External I/O Device

The M.2 slot can be either B key or M key.
Please select the right type to be installed.