This USB-to-RS232 serial port converter is the ideal accessory for laptop and desktop computers that do not have a COM or DB9 serial port. Supporting Windows, Mac, Linux, and Android for rapid performance, it is a convenient connectivity solution for industrial automation systems, scientific instruments, point of sale systems, and other specialized industrial and consumer applications.

Tx and Rx LED Indicators

TX and RX LED indicator

Entire USB protocol handled on the FTDI chip

Royalty-free drivers eliminate the requirement for USB driver development in most cases

UART interface support for 7 or 8 data bits, 1 or 2 stop bits and ​odd / even / mark / space / no parity

Fully assisted hardware or X-On / X-Off software handshaking

Data transfer rates from 300 baud to 250 kilo-baud at RS232 voltage levels

512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput

Adjustable receive buffer timeout

ESD protection on RS232 I/Os exceeding ±15kV IEC 1000-4-2 Air Gap Discharge, ±15kV for Human Body Mode (HBM) and ±8kV IEC 1000-4-2 Contact Discharge

ESD protection on USB lines exceeding ±2kV for Human Body Mode (HBM), ±200V for Machine Mode (MM) and ±500V for Charged Device Mode (CDM)

Low operating and USB suspend current

Low USB bandwidth consumption

USB 2.0 Full Speed compatible

-40°C to 85°C extended operating temperature range

OS Supported	Windows 7 / 8 / 8.1 / 10 32,64-bit Windows Vista Windows XP 32,64-bit Windows XP Embedded Windows CE.NET 4.2 , 5.0 and 6.0 MAC OS OS-X Linux 2.6.32 or later Android
Connector	USB : USB Type A RS232 : DB9 Male
Cable Length	10 cm (3.94″)
Power Mode	Bus Powered
Operating Voltage	5VDC
Power Consumption	5V x 90mA at Max.
Net Weight	30 g
Dimension
Approvals	CE, FCC
RS232 Pinouts